Whirlpool Baths | Whirlpool Bath Spares | Electronics | Replacement Electronic Controls | Jacuzzi 2 Function Electronic Flat Connection Touchpad Control With Chrome Shroud
OUT OF STOCK
As used on Jacuzzi baths in the UK between 2004 - 2012 - This control is for a Jacuzzi whirlpool bath with up to 1.5kw pump and a 12 volt Ac 20 watt halogen light. If you are unsure, please remove your panel and look at the ondtrol box under the bath - it will have a lavel on the side with the technical details of the box and Model: MSPA004s On/Off pump & Light.
Product dimensions:Outer diameter: 48.5mm (approx)Thread diameter: 40mm (approx)Colour may vary
Please check your connection - Also available with square connection
Caution: All controls pads are tested prior to despatch - please consider that the problem with your current control could be due to failure of the circuitry in the control box. If this is the case, connecting a new control to a faulty control box could have a similar effect on the new control.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725