Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Bath Wastes & Fillers | Replacement Waste Assembly for Aquatech Suction - Gold
OUT OF STOCK
This item contains all the parts needed to replace a defunct Aquatech suction waste. Fitting can be accomplished in less than a day. and the work can be carried out by a competent DIYer or a plumber.
The kit includes a low-level running waste which should fit onto the existing waste pipework by using a 1.5 inch compression type connector. If you are doing the job yourself rather than using a plumber you may need to purchase a tub of glue from us.
This has been a successful suction waste unit for us and is still in current use. fitting this waste rather than converting to a side suction waste maintains the designed drainablity of the system. fitting a side suction waste will leave alot of water in the pump and may cause other health problems associated with retained water.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725