Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Bath Wastes & Fillers | Replacement Waste Assembly for Aquatech Suction - Chrome
OUT OF STOCK
This item contains all the parts needed to replace a faulty Aquatech suction waste and any other waste which takes the water for the whirlpool system through the waste rather than by a sidewall suction fitting.Replacement of a suction waste using our kit normally takes less than two hours and requires the skill level of a competent DIY person or a plumber.
The kit also includes a Pegasus inline waste trap which should fit onto the existing waste pipework by using a 1.5 inch compression type connector. If you are doing the job yourself rather than using a plumber you may need to purchase a tub of glue from us.
We believe this kit includes all the necessary parts to replace the old waste and connect to the existing 1.5" nominal bore suction pipe - if you believe your bath needs other fittings please send us a photograph and we will tailor the kit to suit your bath at no extra charge. We also provide 8am-8pm installation support for you or your plumber 7 days a week!
This has been a successful suction waste unit for us and is still in current use. Fitting this waste rather than converting to a side suction waste maintains the designed drainablity of the system. Fitting a side suction waste will leave alot of water in the pump and may cause other hygiene problems associated with retained water.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725