Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Components | Pegasus System Component Packs | Replacement kit for pump unions on baths supplied by Bathstore
OUT OF STOCK
Problem with broken or leaking unions on a Whirlpool bath from Bathstore? This is a fairly common problem as forums on the internet will indicate.
Pegasus Whirlpool has assembled a kit of parts is designed to overcome the problems associated with broken or leaking unions on baths supplied by Bathstore. The pack also includes half a tub of glue (to keep the cost down) and just in case you have to remove the suction pipe from the bath, we also include a bag of our Silicone to enable you to reseal it reliably.
This replacement union kit for leaking Bathstore whirlpool baths can be fitted by a competent DIY person or a plumber. Our technical support hotline is available to assist. We also have engineers on the road who can do the job for you.
Caution: Most Bathstore baths are supplied with pumps which have imperial connections. However because the baths are made in China, the unions and threads can vary considerably in size and it may be that you will need to use the existing nuts supplied with the bath with our unions.
Please Note: The picture above shows two sets of components, the white parts are supplied with the kit, whilst the black parts are representative of existing pipework.
Any questions, please contact the Pegasus Whirlpool technical support hotline on 01633 244555 ext 3
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725