Whirlpool Baths | Whirlpool Bath Spares | Electronics | Electronic Control Packs | Whirlpool Bath Pump Control Box with Waterlevel Sensor & Airswitch
OUT OF STOCK
This simple Pneumatic control box is supplied with a water level sensor and simple airswitch and air button actuator. Together they will serve to switch on a pump up to 2hp if water is present in the bath -the pump can not be switched on if water is not present in the bath.
Once water is present at the preset level the control box will allow the pump to be powered if the air button is activated by being pressed. Water level sensing will not work with steel baths.
Airline required between Pneumatic control button and airswitch in control box, maximum operating distance 1.5 meter. Hole size required for air operated button is 44mm - other sizes are available.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725