Shopping Basket

Items:
Value:

 

Shopping Basket

Items:
Value:

 
facebooktwitter

Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Pumps | Whirlpool Pumps with Imperial Connections |  Astra Evolux 1200 whirlpool bath pump, 1.00hp with pneumatic switch and drain

Astra Evolux 1200 whirlpool bath pump, 1.00hp with pneumatic switch and drain
Astra Evolux 1200 whirlpool bath pump, 1.00hp with pneumatic switch and drain
Ref: AS/ESUPEV120


Price:142.50
(Excluding VAT at 20%)


 

Air Line



Product Overview:

Astra Evolux 1200 whirlpool bath pump, 1.00HP with pneumatic switch & drain.

For a Pegasus Whirlpool Baths 360° Whirlpool Bath Spin of this Evolux ESUPEV120 whirlpool bath pump click here >>

This Astra Evolux 1.00hp whirlpool pump has imperial pump connections, pneumatic Switch and a connection for whirlpool system drain which can be connected into the Pegasus pop-up-waste with system drain connection as fitted to Pegasus Whirlpool Baths(TM). The system drain connection is for 10mm OD nylon pipe, ff your existing pump has a drain of a different size, please contact us so that we can provide an additional adaptor.

This whirlpool bath pump incorporates a pneumatic switch which can be used to turn the pump on and off. If your whirlpool bath has electronic controls and you don't need the pneumatic switch, it can simply be left in the 'on' position

This pump gives a genuine output of 700w (1.00 HP) as stated on the 'P2' (output) rating. This should not be confused with other whirlpool bath pump suppliers who quote the 'P1' rating which is the input power which will always be considerably higher than the output power.

Pump Information:
Manufacturer's Part Number: WEVO120000021
Pump Type: Whirlpool Pump EVOLUX 1200
Suction Thread: 0.62mm
Discharge Thread: 0.62mm
O Ring Placement: Groove in Pump Union
Pneumatic Switch: YES
Drain Connection: YES
IP Rating: IPx5
Wet End Style: Self Draining
Motor Power: P1 1200w
Volts: 230V 50Hz
P1: 1.0 Kw
P2: 1.0 HP
RPM: 2800 t/min
Amps: 5 Amp
Hz: 50
HMAX: 11.5 M
HMIN: ---
QMAX: 370 L/MIN
TMAX: 40 Degrees C
IP Rating: IPX5
Dimensions: L = 340mm, W = 145mm H = 78mm
Pump Housing: Polypropylene
Motor Racket: Noryl/Ryton - Aluminium
Impellor: Noryl
Mechanical Seal: Alumina / Carbon Graphite

Technical Dimensions (approximation):
Whirlpool Bath Pump Dimensions - Evolux 1200

Click here to determine if the pump you need is Imperial or Metric.


Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555

Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Pumps | Whirlpool Pumps with Imperial Connections |  Astra Evolux 1200 whirlpool bath pump, 1.00hp with pneumatic switch and drain

Secure Payments, Shop with ConfidenceSage Pay Secure PaymentsMastercard Secure PaymentsVerified by VisaMastercardMaestroSwitch Solo CardsPaypal Secure Payments