Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Bath Wastes & Fillers | Whirlpool Bath Filler PUW & O/Flow, Chrome on Brass with 10mm drain
OUT OF STOCK
Our Pegasus Bath-Fill Pop Up Waste is designed to be fitted to a whirlpool bath and fill the bath with water through the overflow and where pump/system drainage is required. The waste is fitted with a connector capable of taking 10mm ID pipe which would normally run from the pump or suction to achieve drainage of retained water.
The Pegasus Bath Fill waste is superbly slim and takes up very little space in the bathing area - it also has a very low pressure requirement and can give a good fill rate with only 0.2 bar or water pressure ( The equivalent of placing your water tank approximately 6 feet above the waste!
This waste is also available in white and gold plated to special order - please ask for details
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725