Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Bath Wastes & Fillers | Silfra - Bath Filler Overflow & Pop-up Waste - Chrome
OUT OF STOCK
The siphon is entirely made from highly resistant thermoplastic material. They are different from the standard siphon for their innovative design and the small size. 85mm is enough space to use this siphon.
Two Exit Spout Body: Installation is easier as it can be connected to the water network system either on the right or left side the body simply by changing the adaptor.
Gaiter: The gaiter is made from PA66 (a nylon material with high performances) with co-stamped ending parts fixed to the overflow body and to the train body by a pressure system without using any mechanical locking, which could lead to damages over time.
Gaskets: The gasket is made from PP/EPDM and is perfectly adaptable with acrylic materials. The special double gasket installed under the waste avoids seepage on porous materials like fibreglass with no silicon needed during the installation.
Brass Spout: Brass spout with aerator, complete with cover ring that allows a better installation of the spout avoiding any scratch on the surface of the bath, ensuring the best draining from the overflow. It can be installed on the bath with a thickness starting from 2mm to 14mm.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725