Whirlpool Baths | Whirlpool Baths | Bath Cleansers & Sanitisers | Whirlpool Bath Cleanser Fluid
OUT OF STOCK
A single use bottle of Whirlbath cleanser especially designed for use in whirlpool baths to remove any build up of soap etc in the whirlpool pipework.
Depending on the use of the bath, recommended cleaning cycle is every two to six weeks. Simply fill the bath to two inches above the jets with cold water, close the air control and circulate through the whirlpool system for twenty minutes. empty and refill bath and circulate for two minutes to dilute any residue.
Please note that using the bath without the whirlpool will not lessen the need to circulate cleanse the system as soap will still build up in the pipework. To lessen this effect always try to run the whirlpool system everytime you use the bath.
We recommend you open the window for ventilation while the cleanser is circulating.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725