Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Bath Wastes & Fillers | Adapted Waste Body With Drain For PH Multijet Whirlpool Baths
OUT OF STOCK
This is a replacement whirlpool bath waste body suitable for replacing the waste of a PH Pools Whirlpool bath. This waste is distinctive due to the drain being in line with the overflow on the waste part and, the two distinctive access covers. An overflow pipe is not normally supplied with this waste as PH Pools made their own, if you need an overflow pipe, then a small amount of 1 inch pipe and a 90 degree elbow will do the job and is what was used by PH Pools.
This product is compatable with our 1" pipe & 90° elbow:Click here for 1" pipe. Click here for 90° elbow.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725