Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Pumps | AP45 Pump and Fittings | Replacement Standard AP45 Pump Delivery Pack, 12 Jet - 3rd Generation (Includes Espa Tiper 15 3M SP2 Whirlpool Bath Pump)
OUT OF STOCK
This is a replacement manifold kit & pump to convert from an AP45 pump. The kit includes sufficient manifolds for a 12 jet system, but can be adapted for 8 & 10 jet systems or increased to include 16 or 20 jets by purchasing extra manifolds - see below. Please note that you may need several of the extenders (07/6320 See below) if the pipe is not long enough after it has been cut from the existing manifold. The suction elbow is already on your bath. The make of pump & unions may vary.
Please note: If you have a drain from the suction to the AP45 pump this should now be connected to the drain pipe from the suction to the waste using the 8mm tee piece supplied.
This kit allows the pump to be mounted slightly lower & ensures full drainage of the pump to the waste when the bath is emptied. The suction may need resealing if the seal is broken - use the silicone supplied.
Some fittings may be tighter than others, but all will have been tested in our workshop before despatch.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725