Pegasus Turbo Charged Microjet Whirlpool Systems
The Pegasus Turbo Charged Microjet Whirlpool System is a true hydro-massage
whirlpool system, giving massage not just on the sides of the body,
but also on the back and feet areas too!
Traditionally whirlpool baths have been fitted with three
whirlpool jets positioned either side of the body. This is great
for easing away muscular aches and pains in the legs but does little
for aching feet and aching backs. Manipulating the traditional eyeball
to deflect the flow of water towards the back or feet is usually
a compromise between direction of flow & power of the jet, and
the flow of the jet rarely reaches the desired area of pain......
"Turbo option for a truly invigorating
aftersport massage"
The optional addition of our Turbo compressor completely
transforms the normal bathing experience. It really is "Sugar
and Spice". First turn on the whirlpool for a gentle swirling
relaxing massage, then press the turbo button and the bath comes
alive with millions of bubbles massaging the whole body with an
invigorating aftersport massage. Once the aches and pains have been
massaged away, simply press the turbo button once again and the
gentler whirlpool action will relax away the stress and strain of
a long day.
Is it a true Turbo? Yes it is - unlike other
systems which use Turbo in their name, ours is a true Turbo system
with a significant increase in power over a standard whirlpool system.
How does it work? In a normal whirlpool bath
the water is taken from the bath to the pump which then recirculates
it back into the bath through the venturi jets. As the water is
pumped through the venturi it, goes through a reducer which increases
the speed of the water and creates a vacuum. Another pipe is strategically
placed to deliver air from the air regulator on top of the bath
into this vacuum. When the air regulator is open, air is drawn into
the vacuum where it is mixed with the water and forced into the
bath. Generally the more air mixed with the water the stronger the
massage felt by the bather.
Our Turbo system does away with the regulator on top
of the bath. Research amongst our customers shows that three or
four weeks after the bath has been installed the regulator is left
in the fully open position and rarely disturbed again. In its place
we put a safety loop and non-return valve which effectively turns
the air supply through 180 degrees to the underneath of the bath.
To this non-return valve we then attach an air compressor. Finally
an additional of off button is incorporated inot the rim of the
bath which when operated, turns on the compressor which then forces
air into the venturi vacuum. This forced air greatly increases the
amount of air in the bath, which in turn increases the strength
of the massage and the buoyancy effect.
"Your Pegasus Whirlpool Bath is designed
to look after body and mind"
Technical matters: There are no compromises
on the features of the Pegasus microjet whirlpool system. Curved
pipework ensures drain down of water from the system pipework to
the outlets in the bath. The Pump is fitted to the bath so that
you receive the bath as we have designed and tested it.
There can be no mistakes with critical pump heights
which could affect performance and hygiene - the plumber simply
installs the bath as he would an ordinary bath.
The electrician will find that the pump has been pre-wired
so that all he has to do is to take the lead and connect it into
the 13 amp ring main via a fused spur and an Earth Leakage Circuit
Breaker.
There are no compromises on jet positions either.
Pegasus Whirlpool Systems incorporate Third Generation Whirlpool
Technology to ensure that the jets can be placed on the bath in
the right place for the customer. Individually piped whirlpool jets
do not compromise the Manufacturer's original design for support
of the bath. We use the bath manufacturer's support system in the
place it was designed to be. Our jets can fit right up against a
bath leg if that is where they need to go and they will not place
any stress on the bath!
"Any bath can become a Pegasus Whirlpool
Bath - including your existing bath, without removal!"
Options The whirlpool fittings are available
in a wide choice of colours to match your bath and also Chrome and
a luxurious Shades of Gold to match your taps. A popular option
is coloured jets to match your bath with controls in either Chrome
or Gold to match your taps.
The unique pipework to each jet forms natural curves
to ensure that water drains out of the system after use. The ultimate
drainage option is our 'Ultra-drain Pop-Up-Waste' which is specially
adapted to allow every last drop of water to drain from the suction
and pump. The Ultra-drain Pop-Up-Waste is available in white, Chrome
or two Gold.
The turbo effect can be further controlled by specifying
one of our '3 pressure' turbo compressors. These compressors can
be regulated to three power levels by repeatedly pressing the turbo
button. Of course the ultimate luxury is our electronically controlled
"Turbo Sensations" system with electronic variable control,
wave settings and auto-blow-dry!
Finally, why not create a relaxing ambience by illuminating
your whirlpool with one of our luxurious underwater lights.
Features & Benefits
- Microjets Small size enables them to be positioned
virtually anywhere on the bath with out any stress to the bath,
enabling the bather to enjoy allround hydrotherapy.
- No Eyeballs Because the jets can be placed all around
the bathing area there is no need for directional eyeballs,
the hydromassage is there already. Removing the eyeballs also
eliminates hidden dirt traps resulting in a more hygienic whirlpool.
- Manifold water distribution Provides naturally curving
pipework which ensures exceptional drainage of residual water
from the pipework into the bath.
- Individually piped venturi Jets on the bath in exactly
the right place to benefit the customer without any stress on
the bath especially when fitting jets in the back of the bath.
- Slim Pipework Can fit past even the tightest bath legs
and remain within the confines of the bath. Allows the whirlpool
to be fitted without altering the bath manufacturer’s specified
legs or positioning.
- Slim venturi Fit to most baths in the right place without
exceeding the confines -even with wooden panels.
- Powerful Pump Purpose designed pump capable of producing
44 gallons per minute, capable of powering up to 16 Jets from
only a 3/4HP motor.
- Pump pre-mounted to bath Ease of installation. Ensures
bath is fitted with the pump at the right height as fitted and
tested by us.
- Optional Ultra-drain Pop-Up-Waste An important consideration
when back jets are required on a bath that is to be fitted with
wooden side and end panels. This option allows us to fit the
pump lower on the bath creating more room for the panel and
the backjets, without sacrificing hygiene by retaining surplus
water in the system
Availability The Pegasus whirlpool system
is available from most good bathroom retailers and can be fitted
to virtually any acrylic bath of your choice - including retro-fitting
to your existing bath in-situ! Conversion of your new bath is normally
carried out by our fast fitting service within five working days
of us receiving the order. The Pegasus whirlpool system is also
available as a kit to convert an existing bath.
The Pegasus Whirlpool System is available in Kit
Form for both UK and Worldwide Export
No medical claims are made for the use of this product.
In accordance with our policy of continual product improvement,
we reserve the right to amend product specifications without prior
notice.
