Frequently Asked Questions
My whirlpool system draws water to the pump through
the waste and the pump keeps surging or hunting and/or the water
keeps draining from the bath.
Chances are, you have an Aquatech or similar system
and you'll need a replacement combined waste and suction. Take a
look through the pictures below. If these look familiar to you and
you're experiencing the problem outlined above, you'll find a replacement
waste if you click
here.

|
This is the suction cover which sits over
the plug hole. Yours should look something similar to this,
if not exactly the same. |
This is the plug hole fitting of an Aquatech
suction waste. |

|

|
This is a picture of a combined suction
and waste as found on Aquatech and other whirlpool systems,
seen from beneath the bath. |
The waste and overflow may look something
like this. |

|