This Pop Up Waste is designed to be fitted to a whirlpool bath where pump drainage is required. The waste is fitted with a connector capable of taking 10mm ID pipe which would normally run from the pump or suction to achieve drainage of retained water.

This unit is designed to be fitted to a whirlpool bath where pump drainage is required. The waste is fitted with a connector capable of taking 10mm ID pipe which would normally run from the pump or suction to achieve drainage of retained water.

The unit is supplied with a low profile water trap with 32mm/50mm connection to waste, 10mm pushfit elbow with G1/4 Screw thread for tapping into suction pipe/pump and 1.5m 10mm nylon drain pipe.

This item contains all the parts needed to replace a defunct Aquatech suction waste.
Fitting can be accomplished in less than a day. and the work can be carried out by a competent DIYer or a plumber.

The kit includes a low-level running waste which should fit onto the existing waste pipework by using a 1.5 inch compression type connector. If you are doing the job yourself rather than using a plumber you may need to purchase a tub of glue from us.

This has been a successful suction waste unit for us and is still in current use. fitting this waste rather than converting to a side suction waste maintains the designed drainablity of the system. fitting a side suction waste will leave alot of water in the pump and may cause other health problems associated with retained water.

This item contains all the parts needed to replace a defunct Aquatech suction waste.
Fitting can be accomplished in less than a day. and the work can be carried out by a competent DIYer or a plumber.

The kit includes a low-level running waste which should fit onto the existing waste pipework by using a 1.5 inch compression type connector. If you are doing the job yourself rather than using a plumber you may need to purchase a tub of glue from us.

This has been a successful suction waste unit for us and is still in current use. fitting this waste rather than converting to a side suction waste maintains the designed drainablity of the system. fitting a side suction waste will leave alot of water in the pump and may cause other health problems associated with retained water.