A single speed pneumatically switched blower with a superb output volume of 35l per second, will run up to 30 air spa nozzles, Tturbo-charging a whirlpool system or as a relacement blower for most other air spa systems.

Conforms to European Standards K78B- Wl W2 W3 (based on 60335-1 Including A2 A5 A6) K78B-2-6 (based on 60335-2-60)

Fan unit electrical rating: 220/240V, 500/600W 2.5amp, 5Hz, Class 1.

A three speed pneumatically switched blower with a superb output volume of 35l per second, will run up to 30 air spa nozzles, Tturbo-charging a whirlpool system or as a relacement blower for most other air spa systems. Needs to be operated by a Pneumatic actuator - first press turns blower on at full power, second press of actuator gives medium speed, third press gives low speed and fourth press turns blower off.

Conforms to European Standards K78B- Wl W2 W3 (based on 60335-1 Including A2 A5 A6) K78B-2-6 (based on 60335-2-60)

Fan unit electrical rating: 220/240V, 500/600W 2.5amp, 5Hz, Class 1.

This superb 800watt air blower From Metrax is rated IPX5 and is suitable for powering spa systems with up to 36 nozzles. It can also be used for Most air track baths such as those supplied by ourselves, PH Pools, and Airbath. The blower is very quiet compared to other blowers we have used in the past and comes as standard with a powerful 300watt heating element with a thermal cutout which switches the element off once the blower has reached operating temperature.

The blower is operated by a Pneumatic switch and requires a pneumatic button to operate it.
The outlet spigot is suitable for connection to 1 inch/32mm pipework.
TUV Approved

This superb 800watt air blower From Metrax is rated IPX5 and is suitable for powering spa systems with up to 36 nozzles. It can also be used for Most air track baths such as those supplied by ourselves, PH Pools, and Airbath. The blower is very quiet compared to other blowers we have used in the past and comes as standard with a powerful 300watt heating element with a thermal cutout which switches the element off once the blower has reached operating temperature.

The blower is unswitched ans is designed to be operated through a seperate control box (not supplied)
The outlet spigot is suitable for connection to 1 inch/32mm pipework.
Total Power requirement 1100 watts
TUV Approved

This superb 1000watt air blower From Metrax is rated IPX5 and is suitable for powering spa systems with up to 36 nozzles. It can also be used for Most air track baths such as those supplied by ourselves, PH Pools, and Airbath. The blower is very quiet compared to other blowers we have used in the past and comes as standard with a powerful 300watt heating element with a thermal cutout which switches the element off once the blower has reached operating temperature.

The blower is designed to be run from a seperate control box (not supplied)
The outlet spigot is suitable for connection to 1 inch/32mm pipework.
The Ozone production for this blower is 0.05 ppm (TUV and the European standards allow 0.10 ppm)
Total Power Consumption 1300 watt
TUV Approved