Product Overview:

Astra Evolux 1000 whirlpool bath pump, 0.95HP with pneumatic switch.

For a of this Evolux ESUPEV100 whirlpool bath pump click here >>

This Astra Evolux 0.95hp whirlpool pump incorporates a pneumatic switch which can be used to turn the pump on and off. If your whirlpool bath has electronic controls, you probably don't need the pneumatic switch, and it can simply be left in the 'on' position

This pump gives a genuine output of 700w (0.95 HP) as stated on the 'P2' (output) rating. This should not be confused with other whirlpool bath pump suppliers who quote the 'P1' rating which is the input power - The Input rating (P1) will always be higher than the output(P2)

Pump Information:
MPN: ESUPEV100
P1: 0.80Kw / 1.07HP
P2: 0.70kw / 0.95HP
Volts: 230v
Hertz: 50hz
Amps: 3.6amps

Pump Materials:
Pump Body: Polypropilene
Motor Bracket: Polypropilene / Ryton
Impeller: Noryl
Mechanical Seal: Alumina / Carbon Graphite
Insulation Class: F
Protection Class: IPX5

Pump Dimensions:
Length: 313mm
Height: 169mm
Width: 145mm

Technical Dimensions (approximation):

Click here to determine if the pump you need is Imperial or Metric.

Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555