Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Components | Whirlpool Pumps | AP45 Pump and Fittings | 6 Branch Manifold - For AP45 pump
OUT OF STOCK
The Pegasus 6 Branch Manifold has a unique flange designed to fit onto a Pegasus AP45 pump. The spigots have an outside Diameter of 12mm and an Inside Diameter of 9mm. If you are replacing a manifold, there is usually enough slack pipe to be able to simply cut the pipes off flush with the top of the manifold and then reglue them onto the new manifold. A 9mm slip plug is available to blank of surplus spigots ie, if your bath has less than 6 jets.
This part is for an 6 jet whirlpool system. It's held in place by a metal clamp & includes a sealing washer.
Barb connection: 13.5mmø
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725