Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Components | Pegasus System Component Packs | Standard AP45 Pump Delivery Pack - 6/8 Jet Systems
OUT OF STOCK
Replacement manifold delivery pack for AP45 pump for 6 and 8 jet systems as used on Europa and Pegasus branded baths.
For 10, 12 and 16 jet systems please click here >>
To change the manifold, please cut off the pipe slush with the spigots on the manifold. There is normally enough slack in the pipework to glue the remaining pipe onto the new manifold, but if you need to extend the pipe then please use the "12x8x12 assembly tee with 8mm stop end" in the related products as a straight connector. Extra 12mm ID pipe can be purchased by the roll or by the metre.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725