Whirlpool Baths | Whirlpool Bath Spares | Whirlpool Components | Whirlpool Bath Air Controls | Pegasus Whirlpool Bath Air Control For Mercury & Jacuzzi Whirlpool Baths In Gold
OUT OF STOCK
The Pegasus Mercury Air Turbulence Controller (Air Control) is a high quality Air Control fitted to all Pegasus Mercury whirlpool systems and is also compatible with the air control often found on genuine Jacuzzi whirlpool baths.
The control knob is manufactured from brass which is then gold plated. The valve mechanism comprises a brass casing and a ceramic valve to accurately control the input of air. The valve is encased in an ABS casing and includes a non return valve to prevent water being pushed up through the control should the bath be overfilled.
The Pegasus Mercury air control is remarkably quiet due to the fact that the air supply is taken from underneath the bath.
The Pegasus Mercury Air Control is also available in chrome and white plated finishes.
Holesize required: 28- 32mmOverall length: 87mmProjection above bath surface: 25mmOverall Diameter: 40mmColour Options: White, Chrome plated & Gold Plated
If the Pegasus Mercury air control is not used as a replacement and needs to be fitted onto standard 1 inch nominal bore pipe, please purchase a 3/4" to 1" nominal bore adaptor listed in our tubes and fittings section.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725