Whirlpool Baths | Whirlpool Bath Spares | Air Spa Spares | Air Spa Blowers | Metrax Heated Ozone Blower - 800 Watt - Non Switched
OUT OF STOCK
This product is available to order on a 3-4 week delivery period.
Product Overview: Metrax Ozone blower with 800w motor & 300w heater (non switched)
Blower Features: Extremely robust housing / swing buffer bearing
Security aspects: All of our blowers are equipped with a thermal fuse (105 °C). The thermal fuse is seated directly at the motor winding and prevents the overheating of the blower. Also in the area of the blocking of the motor, this thermal fuse prevents the overheating of the blower. This requirement was designed and implemented in accordance with the DIN EN standard. Safety comes first (!) for us!
300W heater (optional): Only 5 seconds after switch on, the integrated heating of the fan creates warm air, which is channelled into the whirlpool bath. With this technique, an unpleasant effect of colds is avoided when bubbles touch the skin.
Pneumatic switch (optional): Many of our customers want to turn on and off the hot tub blower without interfering with the existing electronics of the Spa. Our pneumatic switch or pneumatic button is attached to the edge of the tub. By this you can easily turn the blower on and off.
Ozone lamp (optional): Ozone is generated by this lamp. Because Ozone has an additional oxygen molecule compared to ordinary air, the air that is generated by the blower is of higher oxygen concentration. This effect sterilizes water and ensures more hygiene during use. Also: The nozzles can be cleaned with the Ozone while the tub is empty.
3-stage Electronic Control (optional): A pneumatic switch or button is attached to the hot tub. With this, the amount of air produced by the fan can be regulated in 3 stages. With the first hit onto the button, the fan switches on at the lowest level, at the second and third it increases its intensity. With a fourth hit, you can turn off the hot tub blower.
Click here for technical information
Blower Specifications: Power: 800W Heater: 300W Max Pressure: 140 mbar The blower is unswitched and is designed to be operated through a seperate control box (not supplied). The outlet spigot is suitable for connection to 1 inch/32mm pipework. Vibration dampening. Reliable high quality motor. Compact design. Top quality insulation. TUV Approved
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555
© Pegasus Whirlpool Baths Ltd Pegasus Whirlpool Baths Ltd :: 61-62 Lower Dock Street, Newport. NP201EF :: Registered in Cardiff No. 4289725
© Pegasus Whirlpool Baths Ltd Registered in Cardiff No. 4289725