Compact 560w replacement pump suitable as a replacement whirlpool pump for whirlpool systems with metric connections: 50mm discharge to jets and 50mm connection from suction pipe. Pre-fitted with pneumatically operated airswitch this Whirlpool Pump conforms to all relevant European standards IPx5, TUV, kEMA, CENELEC

This whirlpool bath pump incorporates a pneumatic switch which can be used to turn the pump on and off. If your whirlpool bath has electronic controls and you don't need the pneumatic switch, it can simply be left in the 'on' position

This pump gives a genuine output of 400watts (0.54 HP) as stated on the 'P2' (output) rating. This should not be confused with other whirlpool bath pump suppliers who quote the 'P1' rating which is the input power which will always be considerably higher than the output power.

P1 0.56Kw / 0.75HP

P2 0.40kw / 0.54HP

230v 50hz - 2.5 amps

Dimensions: Length = 300mm, Height = 190mm, Width = 157mm

Pump housing: Polypropylene, Motor racket: Noryl/Ryton - Aluminium, Impeller: Noryl, Mechanical seal: Alumina / carbon graphite

If you have any doubt about the thread size of your whirlpool pump connections please Click here to determine if the pump you need is Imperial or Metric.

Click Here to see a larger picture of this Sirem Pump

Price: £147.50 (£177.00 Including VAT at 20%)