Koller 3611WCP centre suction inlet whirlpool pump with 10mm drain & pneumatic switch.
For a of this Koller 3611WCP whirlpool bath pump click here >>
A unique Koller whirlpool pump identified by the centre suction inlet, imperial thread connection and 10mm drain facility. This pump requires a union with an "o" ring seal in the union as there is no seal in the pump body. The pump includes a pneumatic air switch which will turn the pump on and off via a puff of air from a pneumatic button usually mounted on the rim of the bath.
Manufacturer's Part Number: 3611WCP
Pump Type: Centre suction whirlpool pump
Wet End Style: Centre Suction / Centre Discharge
Pump: 240 4421P
Motor Power: (P1) KW 0.55 KW
Volts: / Hz 220-240V / 50Hz
Connection Size: Ø 1.5'' BSP (62mm outside diameter)
Suction Thread: 1.5"BSP (62mmOD)
Discharge Thread: 1.5"BSP (62mmOD)
Thread Pitch: 1.5 BSP
O Ring Placement: Groove in Pump Union
Pneumatic Switch: Yes
Drain Connection: Yes (10mm ID)
IP Rating: IPx5
Click here to determine if the pump you need is Imperial or Metric.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555