Espa Tiper 90m self draining & switched whirlpool bath pump.
For a of this Espa Tiper 90m whirlpool bath pump click here >>
Espa Tiper 90m whirlpool bath pump is suitable for replacing most whirlpool bath pumps with metric fittings where the "O" Ring seal is in the pump rather than the pump connector. Before ordering the pump please check the dimensions of your existing fittings against the chart below and the 360 degree image in the link above. The Tiper 90m pump is fairly unique in that it has the 'O' ring seals in the pump body rather than in the pump unions. This type of pump was largely used by Ideal Standard and Aquatech Whirlpool.
This pump is normally in stock for next working day delivery Nationwide and into Europe within three to four days
Any questions or queries, please call us - we are open Monday to Friday 8:30-5.00 or email us a picture of your pump.
Manufacturer's Part Number: Tiper0 90M EC SP1
Pump Type: Whirlpool Pump Tiper0 90M
Suction Thread: Ø 0.65mm
Discharge Thread: Ø 0.65mm
O Ring Placement: Groove in Pump Body
Pneumatic Switch: YES
Drain Connection: No
IP Rating: IP55
Wet End Style: Self Draining
Motor Power: P1 0.85Kw
Volts: 230V 50Hz
P1: 0.85 Kw
RPM: 2800 t/min
Amps: 3.8 Amp
HMAX: 12.0 M
HMIN: 0 m
QMAX: 70-345 L/MIN
TMAX: 50 Degrees C
Technical Dimensions (approximation):
Click here to determine if the pump you need is Imperial or Metric.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555