Astra Evolux 2000 whirlpool bath pump, 1.5hp, unswitched with whirlpool system drain connection.
For a of this Evolux ESUPEV200 whirlpool bath pump click here >>
This Astra Evolux 1.5HP whirlpool pump has imperial pump connections and a connection for whirlpool system drain for use with the Pegasus pop-up-waste with system drain connection as fitted to Pegasus Whirlpool Baths(TM). The system drain is for 10mm OD nylon pipe, ff your existing pump has a drain of a different size, please contact us so that we can provide an additional adaptor - if you don't require a drain, we will fit a stop plug in its place.
This whirlpool bath pump incorporates a pneumatic switch which can be used to turn the pump on and off. If your whirlpool bath has electronic controls and you don't need the pneumatic switch, it can simply be left in the 'on' position
This pump gives a genuine output of 1.2Kw (1.5HP) as stated on the 'P2' (output) rating. This should not be confused with other whirlpool bath pump suppliers who quote the 'P1' rating which is the input power - The input rating(P1) will always be higher than the output rating(P2)!
P1: 1.4Kw / 1.09hp
P2: 1.2kw / 1.5hp
Pump Body: Polypropilene
Motor Bracket: Polypropilene / Ryton
Mechanical Seal: Alumina / Carbon Graphite
Insulation Class: F
Protection Class: IPX5
Technical Dimensions (approximation):
Click here to determine if the pump you need is Imperial or Metric.
Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555