Not all whirlpool baths are made the same. Our baths are now fitted with our latest development of 4th Generation (4G) Pipework. Evolved over 25 years at Pegasus Whirlpool Baths™, 4G pipework is the only fully draining whirlpool pipework. It works on the priciple of "what goes up must come down" and has been designed with hygiene in mind.
Sensations & Neptune systems:
When the bath is emptied, the pump & pipework will drain completely, but just to make sure that every last drop has gone, the heated blower is programmed to automatically purge the pipework of any remaining droplets 15 minutes after you have emptied the bath.
Just like the Sensations & Neptune systems, the pump & pipework will drain completely when the bath is emptied. However, the Air-zoning whirlpool & spa systems have a manual purge facility that works in the same way as the automatic purge but has to be manually activated to take effect. There is no pipe drying purge on whirlpool systems only.
There is no facility to purge the pipework on a pneumatic system. An upgrade to one of our electronic systems is required if you want this option.
Maintenance consists of flushing the system with our whirlbath cleanser six or seven times a year depending on usage - we include a two month hygiene pack with every system.
We are so proud of our unique 4G pipework that we are happy to show it off. for a 360° spin of a Pegasus Whirlpool Bath & 4G pipework click here >>
To ensure that your whirlpool pipework stays clean and free from bacterial, we recommend regular cleansing of the pipework by using the following two whirlpool bath cleaners:
Whirlpool Bath Cleaner - For regular cleansing of whirlpool pipework. Use every four to six weeks.
1. Simply fill the bath with warm water add the contents and with the air controller closed switch on the whirlpool for 10-15 minutes.
2. Drain the bath and rinse thoroughly.
Only use in accordance with the manufacturer's directions.
Whirlpool Bath Sanitisers - For regular sanitising of the whirlpool bath.
1. After each use of the bath and before emptying, simply put one tablet into the bath water.
2. Switch on the system and let it run for 2 to 3 minutes.
3. Switch off the sytem and let it drain as normal.
4. Your whirlpool bath has now been effectively sanitized.