Need assistance? Call us on 0845 130 2000

4 Branch Manifold - 12mm OD Spigots WITH 9MM ID

Whirlpool Baths | Whirlpool Bath Spares | Pipe, Tubes and Pipe Fittings | Pipe Fittings and Components | 4 Branch Manifold - 12mm OD Spigots WITH 9MM ID

4 Branch Manifold - Spigots 12mm OD with 9mm ID for one inch water connection Ref: K0/20/2
The Pegasus 4 Branch Manifold has 4 Spigots and a Male "one inch" connection at one end and a "1 inch" female connection at the other. In whirlpool bath terms One inch refers to the nominal bore of the pipe it is designed to take. The Outside Diameter of "one inch" pipe is 33.5mm The manifolds can be joined together. You will require a "one inch" stop end to blank off the female end.

The spigots have an Outside Diameter of 12mm and an Inside Diameter of 9mm. If you are replacing a manifold, there is usually enough slack pipe to be able to simply cut the pipes off flush with the top of the manifold and then reglue them onto the new manifold. 9mm ID Slip Plugs are available to blank of surplus spigots.
Click here to see a larger picture

Price: £4.56 (£5.47 Including VAT at 20%)